Service Hotline
0576-86011208
0576-86011208
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
L-3
EBP INSTRUMENTS
Shanghai, Shenzhen, Ningbo
1000 sets
TT in advance
1 set
Features:
1. Large screen(128×64 dot matrix LCD), showing all functions and parameters.
2. Test at any angle, even upside down.
3. Support "forged steel (Steel)" material, when using the D/DC impact device test "forged" sample, can read HB value directly, without the need for manual checking table.
4. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL and three types of strength values immediately.
5. Seven impact devices are available for special application. Automatically identify the type of impact devices.
6. Large capacity memory could store 600 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
7. Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
8. Battery information indicates the rest capacity of the battery and the charge status.
9. User calibration function.
10. USB port with the PC humanity multi-functions data proceeding software.
11. Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
12. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 200 hours (EL off and no printing).
13. Auto power off to save energy.
14. Industrialized housing design, sturdy, compact, portable, high reliability, suitable for harsh operating environment, vibration, shock and electromagnetic interference.
15. Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Specification:
Hardness scale | HL, HB, HRB, HRC, HRA, HV, HS | |
Measuring range | HLD (170-960), HRC (17.9-69.5), HB (19-683), HV (80-1042), HS (30.6-102.6), HRA(59.1-88), HRB (13.5-101.7) | |
Display LCD | dot matrix LCD, 128×64 dots | |
Data memory | 500 groups max.（relative to impact times 32～1） | |
Printing paper | width is （57.5±0.5）mm, diameter is 30mm | |
Standard Impact Device | D | |
Optional Impact Devices | DC, D+15, G, C, DL | |
Battery pack | 6V NI-MH | |
Battery charger | 9V/500mA | |
Continuous Working time approx. | 200 h (with back light, No Printing) | |
Communication interface | USB2.0 | |
Operating temperature | -10℃~40℃ | |
Humidity | ≤90% | |
Dimensions | 210 x 85 x 45mm (main unit) | |
Weight approx. | about 0.6kg (host). | |
Main Application:
1.Die cavity of molds
2.Bearings and other parts
3.Failure analysis of pressure vessel, steam generator and other equipment
4.Heavy work piece
5.The installed machinery and permanently assembled parts
6.Testing surface of a small hollow space
7.Material identification in the warehouse of metallic materials
8.Rapid testing in large range and multi-measuring areas for large-scale work piece.
Packing list:
ITEM | QTY |
Main unit | 1 PC |
Standard D Impact Device | 1 PC |
Standard Calibration Block | 1 PC |
Standard Support Ring | 1 PC |
Brush | 1 PC |
USB Cable | 1 PC |
PC Software | 1 PC |
User Manual | 1 PC |
Instrument Case | 1 PC |
Warranty | 2 Years |
RELATED OPTIONAL ITEMS
Type of Impact Device | DC(D)/DL | D+15 | C | G | E |
Impacting energy Mass of impact body | 11mJ 5.5g/7.2g | 11mJ 7.8g | 2.7mJ 3.0g | 90mJ 20.0g | 11mJ 5.5g |
Test tip hardness: Dia. Test tip: Material of test tip: | 1600HV 3mm Tungsten carbide | 1600HV 3mm Tungsten carbide | 1600HV 3mm Tungsten carbide | 1600HV 5mm Tungsten carbide | 5000HV 3mm synthetic diamond |
Impact device diameter: Impact device length: Impact device weight: | 20mm 86(147)/75mm 50g | 20mm 162mm 80g | 20mm 141mm 75g | 30mm 254mm 250g | 20mm 155mm 80g |
Max. hardness of sample | 940HV | 940HV | 1000HV | 650HB | 1200HV |
Mean roughness value of sample surface Ra: | 1.6μm | 1.6μm | 0.4μm | 6.3μm | 1.6μm |
Min. weight of sample: Measure directly with stand Need coupling tightly | >5kg 2～5kg 0.05～2kg | >5kg 2～5kg 0.05～2kg | >1.5kg 0.5～1.5kg 0.02～0.5kg | >15kg 5～15kg 0.5～5kg | >5kg 2～5kg 0.05～2kg |
Min. thickness of sample Coupling tightly: Min. layer thickness for surface hardening: |
5mm
≥0.8mm |
5mm
≥0.8mm |
1mm
≥0.2mm |
10mm
≥1.2mm |
5mm
≥0.8mm |
Size of tip indentation | ||||||
Hardness 300HV | Indentation diameter: Depth of indentation: |
0.54mm
24μm |
0.54mm
24μm |
0.38mm
12μm |
1.03mm
53μm |
0.54mm
24μm |
Hardness 600HV | Indentation diameter:
Depth of indentation |
0.54mm
17μm |
0.54mm
17μm |
0.32mm
8μm |
0.90mm
41μm |
0.54mm
17μm |
Hardness 800HV | Indentation diameter:
Depth of indentation |
0.35mm
10μm |
0.35mm
10μm |
0.35mm
7μm |
--
-- |
0.35mm
10μm |
Application | DC type used to measuring hole or inside face of cylinder, DL type used to measuring elongated narrow slot or hole, D type for routine measurements. | Suitable for measuring surface of the trench or concave. | Suitable for measuring thin workpiece and harden surface. | Suitable for heavy or rough castings and forgings. | Suitable high hardness material. | |
Features:
1. Large screen(128×64 dot matrix LCD), showing all functions and parameters.
2. Test at any angle, even upside down.
3. Support "forged steel (Steel)" material, when using the D/DC impact device test "forged" sample, can read HB value directly, without the need for manual checking table.
4. Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL and three types of strength values immediately.
5. Seven impact devices are available for special application. Automatically identify the type of impact devices.
6. Large capacity memory could store 600 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
7. Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
8. Battery information indicates the rest capacity of the battery and the charge status.
9. User calibration function.
10. USB port with the PC humanity multi-functions data proceeding software.
11. Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
12. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 200 hours (EL off and no printing).
13. Auto power off to save energy.
14. Industrialized housing design, sturdy, compact, portable, high reliability, suitable for harsh operating environment, vibration, shock and electromagnetic interference.
15. Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Specification:
Hardness scale | HL, HB, HRB, HRC, HRA, HV, HS | |
Measuring range | HLD (170-960), HRC (17.9-69.5), HB (19-683), HV (80-1042), HS (30.6-102.6), HRA(59.1-88), HRB (13.5-101.7) | |
Display LCD | dot matrix LCD, 128×64 dots | |
Data memory | 500 groups max.（relative to impact times 32～1） | |
Printing paper | width is （57.5±0.5）mm, diameter is 30mm | |
Standard Impact Device | D | |
Optional Impact Devices | DC, D+15, G, C, DL | |
Battery pack | 6V NI-MH | |
Battery charger | 9V/500mA | |
Continuous Working time approx. | 200 h (with back light, No Printing) | |
Communication interface | USB2.0 | |
Operating temperature | -10℃~40℃ | |
Humidity | ≤90% | |
Dimensions | 210 x 85 x 45mm (main unit) | |
Weight approx. | about 0.6kg (host). | |
Main Application:
1.Die cavity of molds
2.Bearings and other parts
3.Failure analysis of pressure vessel, steam generator and other equipment
4.Heavy work piece
5.The installed machinery and permanently assembled parts
6.Testing surface of a small hollow space
7.Material identification in the warehouse of metallic materials
8.Rapid testing in large range and multi-measuring areas for large-scale work piece.
Packing list:
ITEM | QTY |
Main unit | 1 PC |
Standard D Impact Device | 1 PC |
Standard Calibration Block | 1 PC |
Standard Support Ring | 1 PC |
Brush | 1 PC |
USB Cable | 1 PC |
PC Software | 1 PC |
User Manual | 1 PC |
Instrument Case | 1 PC |
Warranty | 2 Years |
RELATED OPTIONAL ITEMS
Type of Impact Device | DC(D)/DL | D+15 | C | G | E |
Impacting energy Mass of impact body | 11mJ 5.5g/7.2g | 11mJ 7.8g | 2.7mJ 3.0g | 90mJ 20.0g | 11mJ 5.5g |
Test tip hardness: Dia. Test tip: Material of test tip: | 1600HV 3mm Tungsten carbide | 1600HV 3mm Tungsten carbide | 1600HV 3mm Tungsten carbide | 1600HV 5mm Tungsten carbide | 5000HV 3mm synthetic diamond |
Impact device diameter: Impact device length: Impact device weight: | 20mm 86(147)/75mm 50g | 20mm 162mm 80g | 20mm 141mm 75g | 30mm 254mm 250g | 20mm 155mm 80g |
Max. hardness of sample | 940HV | 940HV | 1000HV | 650HB | 1200HV |
Mean roughness value of sample surface Ra: | 1.6μm | 1.6μm | 0.4μm | 6.3μm | 1.6μm |
Min. weight of sample: Measure directly with stand Need coupling tightly | >5kg 2～5kg 0.05～2kg | >5kg 2～5kg 0.05～2kg | >1.5kg 0.5～1.5kg 0.02～0.5kg | >15kg 5～15kg 0.5～5kg | >5kg 2～5kg 0.05～2kg |
Min. thickness of sample Coupling tightly: Min. layer thickness for surface hardening: |
5mm
≥0.8mm |
5mm
≥0.8mm |
1mm
≥0.2mm |
10mm
≥1.2mm |
5mm
≥0.8mm |
Size of tip indentation | ||||||
Hardness 300HV | Indentation diameter: Depth of indentation: |
0.54mm
24μm |
0.54mm
24μm |
0.38mm
12μm |
1.03mm
53μm |
0.54mm
24μm |
Hardness 600HV | Indentation diameter:
Depth of indentation |
0.54mm
17μm |
0.54mm
17μm |
0.32mm
8μm |
0.90mm
41μm |
0.54mm
17μm |
Hardness 800HV | Indentation diameter:
Depth of indentation |
0.35mm
10μm |
0.35mm
10μm |
0.35mm
7μm |
--
-- |
0.35mm
10μm |
Application | DC type used to measuring hole or inside face of cylinder, DL type used to measuring elongated narrow slot or hole, D type for routine measurements. | Suitable for measuring surface of the trench or concave. | Suitable for measuring thin workpiece and harden surface. | Suitable for heavy or rough castings and forgings. | Suitable high hardness material. | |
