Service Hotline
0576-86011208
0576-86011208
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
E-7000
EBP INSTRUMENTS
Shanghai, China
300 Sets Per Month
T/T in advance
1 set
Introduction:
E-7000 series reflected metallurgical microscopes are suitable to observe the surfaces of non-transparent object. They are equipped with vertical illuminator, plan achromatic objectives with long working distance (no cover glass), wide-field eyepieces and set polarizer device in trinocular. They provide clear and high-contrast picture, convenient operation and etc. They are the ideal instruments for research work in metallography, mineralogy, precision engineering, electronics and etc. They are suitable for scientific research, teaching demonstration in the colleges and factory.
Features:
▲ With plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces, can get clear pictures and wide view field.
▲ Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
▲ 6V 20W Halogen lamp, adjustable control.
▲ Trinocular, can switch to observe normally or to observe the polarize, can send 100% of light to the binocular eyepieces or to the top port.
Technical specifications:
Model | E-7000 |
Eyepiece | Wide field WF10X (Φ18mm) |
Objective | Plan achromatic objectives with long working distance (no cover glass) PL 5X/0.12 |
Plan achromatic objectives with long working distance (no cover glass) PL L10X/0.25 | |
Plan achromatic objectives with long working distance (no cover glass) PL L40X/0.60 | |
Plan achromatic objectives with long working distance (no cover glass) PL L60X/0.75 | |
Eyepieces tube | Trinocular, 30°inclined, (Built-in polarizer for switching) |
Epi-illumination system | 6V 20W, Halogen lamp, lightness adjustable |
Vertical illumination With field diaphragm, aperture diaphragm and polarizer, (Yellow, Blue, Green) filter and frosted filter | |
Focus system | Coaxial coarse / fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm. |
Nosepiece | Quadruple (4 holes) Backward ball bearing inner locating |
Stage | Double layer mechanical (Size: 185mm X 140mm, moving range: 75mm X 50mm) |
Dimension | 200 x 341 x 417mm |
This software can be used with a variety of metallographic microscope to complete the metallographic image acquisition, processing, analysis, report generation and other functions; also have to view the library, geometric measurement, fixed-fold printing, image stitching, image contrast, confocal ), Three-dimensional light maps and other functions. Compared with the traditional manual method, the sample software for metallographic image analysis, with the following advantages:
save the traditional darkroom camera system, directly with a digital camera to take pictures, photos can be saved or printed.
can be compared on the computer map and standard query, do not read the standard books.
can be quickly and accurately automatically calculate the various types of microstructure of the perimeter, area, long axis, short axis, equivalent circle diameter,
Aspect ratio, area percentage and other geometric shape parameters, than the previous manual calculation method has greatly improved.
quantitative metallographic standards can be applied to automatically calculate the level, the level of results to allow human intervention.
can automatically generate the electronic document inspection report, the report can be saved as WORD, EXCEL, PDF and other documents.
The whole inspection process is complete on the computer, to achieve office paperless, greatly enhance the level of enterprise information.
Metallographic analysis:
The software includes eight major categories, more than 100 inspection standards (including GB, JB, QC / T, NJ, DL, YB, TB / T, ISO, ASTM, JIS, etc.), more than 600 metallographic image analysis module, The standards covered are:
commonly used: including grain size, non-metallic inclusions, decarburization layer, quantitative metallographic, phase area analysis.
cast iron: including ductile iron, gray cast iron, vermicular graphite cast iron analysis.
steel: including stainless steel, tool steel, all kinds of carbon steel, all kinds of alloy steel analysis.
Non-ferrous metals and alloys: including aluminum alloy, magnesium alloy, copper alloy, titanium alloy analysis.
vehicles and engines: all types of vehicles, gears, engine and accessories analysis.
power industry standards.
Other: There are powder metallurgy, metallography teaching.
ASTM, DIN, JIS and other foreign standards.
Introduction:
E-7000 series reflected metallurgical microscopes are suitable to observe the surfaces of non-transparent object. They are equipped with vertical illuminator, plan achromatic objectives with long working distance (no cover glass), wide-field eyepieces and set polarizer device in trinocular. They provide clear and high-contrast picture, convenient operation and etc. They are the ideal instruments for research work in metallography, mineralogy, precision engineering, electronics and etc. They are suitable for scientific research, teaching demonstration in the colleges and factory.
Features:
▲ With plan achromatic objectives with long working distance (no cover glass) and wide-field eyepieces, can get clear pictures and wide view field.
▲ Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm.
▲ 6V 20W Halogen lamp, adjustable control.
▲ Trinocular, can switch to observe normally or to observe the polarize, can send 100% of light to the binocular eyepieces or to the top port.
Technical specifications:
Model | E-7000 |
Eyepiece | Wide field WF10X (Φ18mm) |
Objective | Plan achromatic objectives with long working distance (no cover glass) PL 5X/0.12 |
Plan achromatic objectives with long working distance (no cover glass) PL L10X/0.25 | |
Plan achromatic objectives with long working distance (no cover glass) PL L40X/0.60 | |
Plan achromatic objectives with long working distance (no cover glass) PL L60X/0.75 | |
Eyepieces tube | Trinocular, 30°inclined, (Built-in polarizer for switching) |
Epi-illumination system | 6V 20W, Halogen lamp, lightness adjustable |
Vertical illumination With field diaphragm, aperture diaphragm and polarizer, (Yellow, Blue, Green) filter and frosted filter | |
Focus system | Coaxial coarse / fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2μm. |
Nosepiece | Quadruple (4 holes) Backward ball bearing inner locating |
Stage | Double layer mechanical (Size: 185mm X 140mm, moving range: 75mm X 50mm) |
Dimension | 200 x 341 x 417mm |
This software can be used with a variety of metallographic microscope to complete the metallographic image acquisition, processing, analysis, report generation and other functions; also have to view the library, geometric measurement, fixed-fold printing, image stitching, image contrast, confocal ), Three-dimensional light maps and other functions. Compared with the traditional manual method, the sample software for metallographic image analysis, with the following advantages:
save the traditional darkroom camera system, directly with a digital camera to take pictures, photos can be saved or printed.
can be compared on the computer map and standard query, do not read the standard books.
can be quickly and accurately automatically calculate the various types of microstructure of the perimeter, area, long axis, short axis, equivalent circle diameter,
Aspect ratio, area percentage and other geometric shape parameters, than the previous manual calculation method has greatly improved.
quantitative metallographic standards can be applied to automatically calculate the level, the level of results to allow human intervention.
can automatically generate the electronic document inspection report, the report can be saved as WORD, EXCEL, PDF and other documents.
The whole inspection process is complete on the computer, to achieve office paperless, greatly enhance the level of enterprise information.
Metallographic analysis:
The software includes eight major categories, more than 100 inspection standards (including GB, JB, QC / T, NJ, DL, YB, TB / T, ISO, ASTM, JIS, etc.), more than 600 metallographic image analysis module, The standards covered are:
commonly used: including grain size, non-metallic inclusions, decarburization layer, quantitative metallographic, phase area analysis.
cast iron: including ductile iron, gray cast iron, vermicular graphite cast iron analysis.
steel: including stainless steel, tool steel, all kinds of carbon steel, all kinds of alloy steel analysis.
Non-ferrous metals and alloys: including aluminum alloy, magnesium alloy, copper alloy, titanium alloy analysis.
vehicles and engines: all types of vehicles, gears, engine and accessories analysis.
power industry standards.
Other: There are powder metallurgy, metallography teaching.
ASTM, DIN, JIS and other foreign standards.
