Metallic Materials Brinell Hardness Test Tool ISO 6506

Advantages:

1. Equipped with LCD screen panel, menu structure, easy for operation.

2. Closed loop with load cell, test force from 62.5kgf to 3000kgf.

3. Automatic load - dwell - unload main test force.

4. With 10 grades test force, each test force with automatic calibration function.

5. One time casting shell, not metal sheet welding one by one, structure more stable, ensure test result with more higher accuracy;

6. Special design low nose design, suitable for all kinds of labs.

7. Can work with Brinell Indentation Image Measurement software system, support on PC do auto measurement or manual measurement, and generate test report automatically.

8. Built-in printer can print the test data, including Test conditions, number of measurements, average value, maximum value, minimum value, maximum error, etc.

9. Operation steps: 1) Put specimen on working table, manual load pre-load, then machine automatic load main force (load - dwell - unload automatically), make an indentation on specimen;  2) Put the specimen under portable measuring microscope to measure D1, D2 value;  3) Input D1, D2 value into machine screen by keypad, then the hardness value will display on LCD screen directly, no need to check table and calculate, operation very easy.

Test Principle:

The typical test uses a 10 millimetres (0.39 in) diameter steel ball as an indenter with a 3000 kgf (29 kN; 6600 lbf) force. For softer materials, a smaller force is used; for harder materials, a tungsten carbide ball is substituted for the steel ball.

Application Fields:

1.Quality control of Industrial production (machinery manufacturing, metallurgy plants, etc.)

2.Research & Inspection of Inspection Institution and universities laboratories.

3.Ferrous and nonferrous metals, Hardened steel, tempered steel, annealed steel, hardened steel, sheet of various thicknesses, carbide materials, powder metallurgy materials, etc.

Specification:

Standard Accessories: